WHIRLMATIC MOTORLESS  MAGNETIC STIRRERS
 

WHIRLMATIC MOTORLESS  MAGNETIC STIRRERS

 
* Compact
* Ultraflat
* Washable
* Hermitically sealed
* Multipoint
* Corrosion Resistant


CHEMICAL, MICRO-BIOLOGICAL,
BIOTECHNICAL & MEDICAL APPLICATIONS

 
* On Laboratory Bench
*  Directly in Incubator
*  In Cold Chambers
 
The 'WHIRLMATIC' Family
of Magnetic Stirrers with Single and Multi points are aesthetically designed, compact, ultraflat stirring systems. They are washable & hermitically sealed.
    In the conventional Stirrers a magnet fixed to the shaft
of a motor gives a rotational force, whereas motorless stirrers use rotating electromagnetic field to create it.
As there are no moving parts, it is maintenance free.
   They have unique advantages like saving of Space,
Silent & Wear Proof Operation, Maintenance Free
Working and Smooth & Reliable Stirring Speed. The Ultraflat design is ideally suited for many operations. 
 
 
The totally sealed FRP housing makes the Stirrers completely Corrosion Resistant.
   Basically the Whirlmatic Stirrers consist of Control Unit and a Stirring Platform. Stirring Paddles of various sizes and shapes can be used as required. You can have a Single Point Stirrer or Multipoint Stirrer -- on which number of points are located. Speed regulation is by a common Control knob on the Control Unit.
    A special 'Soft Start' technique ensures unattended operation. With 'Soft Start' the stirring paddles always catch the centre and rotate with slow, gradual increase in speed till it attends the set speed.
 

CONTROL UNITS


1) CU - 1 :

3) TH - 100 :
 * Suitable for Single Point Platform SP-1
* Upto 3 Platforms can be connected
* Common speed control
* 230V, 50Hz, 30W
* 110 x 210 x 110 mm (L x W x H)
This is microcontroller based, aesthetically designed & compact unit to be used with Whirlmatic Stirring Platforms, instead of normal controller when heating & timer are required. It also has user programmable methods which can be stored and recalled as & when required for specific application.

* Microcontroller based.  * Feather touch keyboard
* 16 characters backlighted dual line display
* Stirring Speed setting through keyboard
* Maximum stirring speed 850 rpm * Unidirectional / bi-directional 
   stirring * Programmable Timer for stirring / heating duration & 
   unidirectional / bi-directional  selection. * 24 Hours range with 
   display in HOUR:MIN:SEC
* Temperature control for hot water bath * Temperature range: 
   Ambient to 90OC * Temperature accuracy: ± 0.1OC * 10 User 
   Programmable Methods
2) CU - MEGA :
* Suitable for SP-MEGA Platform.
* Only 1 MEGA Platform can be connected.
* Common speed control
* 230V, 50Hz, 90W
* 110 x 210 x 110 mm (L x W x H)

STIRRING PLATFORMS


1) SP - 1 :

SP-1 is Single Point Stirring Platform which accepts 1 Vessel upto 1000 ml Capacity. Control Unit CU-1 accepts 3 such Platforms.
Stirring Power : 16W
Rotation Speed : 100-850 rpm
W x D x H : 145 x 160 x 45 mm
2) SP - MEGA :
SP-1 is Multi Point Stirring Platform which accepts 6 Vessel upto 1000 ml. each or 15 Vessels of 200 ml. each. Control Unit CU - MEGA accepts 1 such platform.
Stirring Power : 90W
Rotation Speed : 100-850 rpm
W x D x H : 262 x 415 x 45 mm

STIRRING PADDLES

 
13 x 50 mm with centre ring for stirring volume 1000 ml.
 
10 x 40 mm with centre ring for stirring volume 200 ml.

Paddles of other sizes and shapes with or without centre ring can be supplied as per requirement.
Stirring Paddle removal rod (PTFE coated) is also available.


HEATING DEVICES

 
1) HOT PLATE :
 
2) HOT WATER BATH :
When stirring along with heating is required the Single Point Stirrer is available with Hot Plate.
The heating control in this case is not precise & hence it can be used when simple heating is required.

Hot Plate Model HP-1

suitable for Single Point Platform SP-1.

Temperature : upto 250
OC
Power : 230V, 50Hz, 1000W
Temp. Control : Blind control using energy regulator 
Dimensions : 160 x 170 x 40 mm
When heating with precise temperature is required the Hot Water Bath can be used. For the temperature control a Digital Temperature Controller can be supplied alternatively Microcontroller based Controller TH-100 can be ordered.

Model HB-Acrylic : Without Temp. Controller
Model HB-SS : Without Temp. Controller
Model HBT-Acrylic : With Temp. Controller
Model HBT-SS : With Temp. Controller

Temperature : Ambient to 600C for Acrylic
Ambient to 990C for SS
Temp. Stability : ± 0.2
OC
Dimensions : 318 x 470 x 153 mm
 

* Due to continuous R & D the specification & Dimensions are subject to Modifications

|  Back to Main Products Range     |      Next   |  

Home

About Us

Client List

Contact Us 

Designed & Hosted by : MID   Promoted by : GID