Automatic Titrator AT-28
 
Model AT-28
is a Potentiometric Titrator designed with the idea of meeting small laboratory requirements, who do not need much sophistication, yet they must have required automation, adequate, data processing and reporting facility for documentation purpose. With features and specifications of Model AT-28 the above purpose is  served. Those who need further facilities such as more user methods, result units etc., can go for Model AT-38B which is far more advanced.

 
Specifications :-

* Microprocessor Based
* Two Methods - FED/SVD FED - Fixed End-point Dosing -
   for titration with set pH or mv. SVD - Step Volume Dosing - for 
   titration with Fixed dosing steps. Ep determined with jump in mv
   or pH. Suitable Ep criteria can be given.
* Three modes of Titrations - Blank / Normality / Sample
* Automatic filling & one key stroke Rinse operation
* Teflon Rod Stirrer with speed adjusted by knob
* Eject facility with simultaneous display of mv or pH.
* Formulae - for Normality, %, ppm concentration TAN / TBN
* Result Unit - %, ppm, (mg KOH/g)  
* Calibration - 3 pt. calibration for pH  
* Time, Date, Titration No. facility
* Reports - Result Report, Document Report, ml/mv  * Ep - 2 Eps
* Facility to enter Burette Factor for Calibration purpose
* Measuring Range - 0-14 pH, -1999 to + 1999 mv
* Display - 20 character, dual line, Alphanumeric backlighted display
* I/P Imp. -
1012 W  * Burette Volume - 20 ml.
* Burette Resolution - 0.001ml./step
* Printer Interface - parallel port for Printers
* Power Supply - 230v + 10v, 50 Hz

Automatic Titrator AT-28

* Dimensions -
 

Main Unit - 300x330x200 mm.
Vessel Stand -130x180x300 mm.
* Weight - Main Unit - 9 Kg.
Vessel Stand - 2.2 Kg.
* Key Board - Aesthetically designed soft touch membrane Key Board with 28 keys.

Ordering Information :-
SPECTRALAB Automatic Potentiometric Titrator Model AT-28 with Standard Accessories -

* Controller Unit - 1No. * Separate Vessel Stand - 1No.
* Glass Titration Vessels - 4Nos. * pH Electrode - 1No.
* Interchangable Burette - 1No. * Mains Cord - 1No.
* Operating Manual - 1No.  

Optional Accessories :-

* Magnetic Stirrer * Temperature Sensor
* PC Interface * Electrodes for all types of Titrations
* Interchangeable Burette * Additional Titration Vessels

* Due to continuous R & D the specification & Dimensions are subject to Modifications

|        Back to Main Products Range     |    Back    |       Next       |                   

Home

About Us

Client List

Contact Us 

Designed & Hosted by : MID   Promoted by : GID